Archive
Thoughts
-
A new approach to developing and implementing standards.
This post was originally posted to OpenRFA.org on June 1st, 2017 and is shared here for posterity. At OpenRFA, we’re not only pushing for standardization, we are proposing a new approach to developing standards through open collaboration. So far, I have yet to see an industry standard (BIM or other) that has been developed through collaboration…
-
The Value of Standardized Shared Parameters
This post was originally posted to OpenRFA.org on May 8th, 2017 and is shared here for posterity. In Revit, shared parameters are unique – each shared parameter has its own Globally Unique Identifier (GUID) assigned at time of creation. This means that just like a person, parameters can have the same name but never the…
-
We should all be using Revit’s worksets for efficient worksharing, not visibility / graphic overrides.
More and more I’ve had debates regarding worksets being used for visibility. My stance is to avoid using worksets to control visibility and graphic overrides – save this task for filters. Using worksets for visibility graphic overrides will completely strip your ability to use works sets the Revit way, which is to efficiently share work. This…
-
BIM Levels of Implementation (LOI)
With all of the new levels that are defined (Level of Detail, BIM Level, etc.) we thought there was one additional level that needed some definition: Level of Implementation (LOI). With BIM, you can use as much or as little of the technology as you are willing and able. I’ve seen dozens of MEP engineering…
-
Industry Foundation Classes (IFC) Defined
The Industry Foundation Classes (IFC) file format was developed by buildingSMART®. The format maintains standards to import and export BIM elements and their parameters between software platforms. In many ways, an IFC is like an intelligent version of a DXF. The IFC Wiki defines IFC as: The Industry Foundation Classes IFC specification is a neutral…
-
Building Information Modeling (BIM) and Facility Management (FM) Is The Future
Yes, Revit is a design tool for architects and engineers. Revit is also evolving into a fabrication tool for contractors. But did you know that a Building Information Model (BIM) can also be beneficial for building owners and facility managers? Autodesk, the leading software company for the building industry, acquired FM Desktop in 2006 only…
-
Reply: Looking for info on learning Revit and BIM solutions for FM company.
I recently had the pleasure of joining an online conversation with a fellow AUGI member. I thought that the post held some relevant questions and answers for the BIM Extension Followers as well. Hello, I am a CAD Tech at a Facilities Management company in Ohio. I have a pretty basic CAD knowledge base. I went…
-
BIM Levels: As explained by The NBS
BIM Levels is a new concept to most of the building industry. Not to be confused with Level of Design (LOD), BIM levels are compliance standards in which projects may (or may not) adhere to. Below is an excellent write-up by The NBS of The UK describing what to expect from each BIM Level. The…
-
Worksets used to control visiblity and graphics are a big no-no.
Can we, as a community, agree that using worksets to control visibility of elements is a horrible idea? There have been a number of models in my recent years where elements’ visibility are controlled based on the workset they are modeled on. Yes, it is easier to turn off multiple worksets based on your personal preference, but…
